How to Measure for Blinds | Window Fit Basics

Measure window blinds by taking three width and three height readings, then use the narrowest width and longest height for an inside mount.

Getting the numbers right on how to measure for blinds comes down to one decision first: inside mount or outside mount. Inside mounts sit within the window frame; outside mounts cover it entirely. That choice changes where your tape goes, so make it before you measure anything. The process takes about five minutes per window, and the payoff is blinds that fit without gaps, rubbing, or a return trip to the store.

Inside Mount: Take Three Widths and Three Heights

For an inside mount, you are working within the frame itself. Start with width: measure across the top, the middle, and the bottom of the frame, recording each to the nearest 1/8 inch. Use the smallest of the three numbers — windows are rarely perfectly square, and the narrowest point is the one your blind must clear.

Height works the same way but inverted. Measure at the left side, the center, and the right side. Use the longest measurement so the blind reaches the sill without a gap at the bottom. Both Home Depot and Lowe’s follow this three-point method in their official guides.

Before ordering, check one more thing: depth. Measure from the front of the frame to the back to confirm the headrail will fit inside. Also look for obstacles — locks, handles, levers, or molding that could block the blind or force it forward.

Outside Mount: Cover the Frame and Add Overlap

An outside mount covers the window entirely, so you measure the area you want the treatment to span. Start at the outermost points where the headrail will sit, well beyond the frame edges. Add overlap on each side for light control and coverage; guidance ranges from about 3/4 inch per side up to 2 inches per side, depending on the seller.

There is a catch worth planning for: outside mounts need wall space for the headrail and mounting brackets, which can require up to 2.5 inches above or beside the window. Check that clearance before you commit to this style. If the wall is tight, an inside mount may be the safer play.

Tools and Fit Rules That Vary by Brand

Use a steel or metal measuring tape for this job, not a cloth one. Multiple retailer guides call this out specifically because cloth tapes stretch and produce readings that are off by fractions — exactly the kind of error that ruins a fit. Record every measurement to the nearest 1/8 inch, and write each one down as you go rather than trusting memory.

One thing to know before you order: fit rules are not universal. The narrowest-width, longest-height method is the common baseline, but some brands recommend slight deductions from the smallest width or height to prevent rubbing or improve sill clearance. The product page or brand guide overrides general advice, so check the specific blind’s instructions before finalizing.

Mount Type What To Measure Which Number Wins
Inside mount Width at top, middle, bottom Narrowest width
Inside mount Height at left, center, right Longest height
Inside mount Depth of the frame Enough for headrail
Outside mount Full coverage area Add overlap per side
Outside mount Wall space for brackets Up to 2.5 inches needed

The most common mistake is measuring once and calling it done. A single reading cannot catch an out-of-square window, and the result is a blind that binds or shows light at the edges. The second most common error is using the wrong tape. Steel, to the nearest 1/8 inch, every time. Home Depot’s measuring guide walks through the three-point method with diagrams, and it is worth a look before your first window.

Measure Once, Order With Confidence

You now have the full sequence: pick your mount, take three widths and three heights, use the narrowest and longest for inside mounts, add overlap for outside mounts, and confirm depth and bracket clearance. That is the complete job. If you are shopping after measuring, our tested roundup of the best 42 inch blinds narrows down the options that fit standard windows.

One honest note: even careful measuring does not guarantee a perfect fit if you skip the product-specific guide. Deductions and depth requirements vary by model, so the five minutes you spend reading the product page is the cheapest insurance you will get. Measure carefully, check the brand’s rules, and the blinds will go up without drama.

FAQs

Should I use the smallest or largest measurement for blinds?

For inside-mount width, use the smallest of your three readings so the blind fits the narrowest part of the frame. For height, use the longest reading so the bottom reaches the sill. Outside mounts reverse the logic: you add overlap beyond the frame for light control.

What happens if my window is not perfectly square?

Most windows are slightly out of square, which is why single measurements fail. Taking three widths and three heights catches the variation. Using the narrowest width and longest height ensures the blind clears the tightest point without leaving a gap at the bottom.

Can I use a cloth tape measure instead of steel?

Retailer guides recommend a steel tape because cloth versions stretch slightly, producing measurements that are off by fractions of an inch. That small error can cause a blind to bind or sit crooked. A steel tape costs a few dollars and removes the risk entirely.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.