How to Mix Brush Killer Concentrate? | The 4 oz Per Gallon Mix

Mix BioAdvanced Brush Killer Plus Concentrate at 4 fl oz per gallon of water, covering up to 500 sq ft per gallon.

Getting the mix ratio right decides whether a thicket of brush dies at the roots or just sulks for a season. The standard mix is straightforward: 4 fluid ounces of BioAdvanced Brush Killer Plus Concentrate per gallon of water. That is half a cup or 8 tablespoons, and one gallon covers up to 500 square feet of actively growing brush. If you are still choosing between products rather than mixing one, our tested roundup of brush killer concentrates compares the options that actually hold up in the field.

The Standard Mix Rate for Brush Killer Concentrate

For general brush and foliage control, the label rate is 4 fl oz per 1 gallon of water.

Scale the batch to your tank. A 1-gallon sprayer takes the full 4 oz; a 2-gallon tank takes 8 oz; a half-gallon tank takes 2 oz. Measure with a marked cup rather than eyeballing it. Overloading the mix does not kill faster, and the yearly cap on this product is real: no more than 17 fl oz of concentrate per 500 sq ft per year.

How to Mix a Tank Sprayer Batch

Fill the tank about halfway with water first, then add the measured concentrate, then top off with the rest of the water. Pouring concentrate into an empty tank leaves it sitting on the bottom where it is harder to disperse.

  • Measure carefully: 4 fl oz = 1/2 cup = 8 tablespoons.
  • Add the concentrate to the partially filled tank.
  • Finish filling with water to the final volume.
  • Close the sprayer and shake well to blend thoroughly.
  • Set the nozzle to a coarse spray and wet the foliage evenly — coated but not dripping.

Shaking matters more than people expect. The concentrate separates fast in the tank, and an unshaken batch sprays weak at the start and hot at the end.

When the Mixing Rules Change: Hose-End and Stumps

Sprayer type changes the procedure. A hose-end sprayer and a freshly cut stump do not get the same diluted mix as a tank sprayer.

Application Mix Rate Coverage
Tank sprayer 4 fl oz per gallon of water Up to 500 sq ft per gallon
Hose-end sprayer Concentrate in the jar, no water added; set the dial to the ounces called for on the label Up to 500 sq ft per full jar
Stump treatment Full strength, never diluted Paint or spray the freshly cut surface only

For a stump, cut the plant down first, then apply the concentrate straight from the bottle to the fresh cut. That undiluted step is what moves herbicide down into the root system — a diluted stump treatment just feeds the top of the wood.

What Are the Rules for Visible Results?

Timing and weather decide whether the mix works as advertised. Apply when brush is actively growing: spring after leaves open, summer when moisture is adequate, or fall before leaves change color. Spray on calm days only, because drift onto desirable plants is the most common and most expensive mistake. If a valuable plant does get hit, rinse it off with water right away.

Results take 1 to 6 weeks depending on the species and how actively it is growing. You are looking for wilting, yellowing, then browning top growth. Rain or watering 4 hours after application will not wash away the effectiveness, so a forecast is less of a worry than wind. One note on legacy labels: older containers may carry the Bayer Advanced Brush Killer Plus name, but it is the same product line and the same mix directions.

FAQs

Can I apply brush killer more than once a year?

Yes, but stay under the label’s annual cap. Multiple retreatments above that limit risk damaging soil and desirable plants nearby.

Will rain right after spraying wash the brush killer off?

No, provided it has been at least 4 hours. If rain hits sooner than that, the mix has not had time to bond with the foliage and may need reapplication.

How long until brush killer shows results?

Expect visible effects in 1 to 6 weeks. Fast-growing annual weeds may wilt within days, while deep-rooted woody brush takes longer. The herbicide works systemically, moving from the leaves down into the root system, so be patient before judging whether a second application is needed.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.