How to Press Apples for Cider | Homemade Pressing Steps

Pressing apples for cider requires grinding them into a coarse pulp first, then applying mechanical pressure through a screw, hydraulic, or car jack press to extract fresh juice.

Homemade cider starts with the right equipment and a willingness to get messy. The key step people miss? Grinding apples into pea-sized pulp before pressing—whole apples in a press produce almost nothing. The most useful equipment is a grinder (scratter) paired with a screw or hydraulic press. For recommendations, see our apple cider press roundup. Below is the full process.

Essential Equipment for Pressing Apples

Three press types suit home use. A screw press uses a manual wheel to grind and a handle to lower the screw. A hydraulic press uses an electric unit for larger batches. A DIY car jack press lets you build a frame from 2-foot and 3-foot boards, using a standard 2-ton bottle jack. Regardless of press, you need a grinder, 5-gallon collection bucket, and mesh bags or cheesecloth. Apples must be quartered or chopped into eighths; coring is not required.

The Correct Pressing Sequence

The process is fixed: clean, chop, grind, load, press, and bottle.

  1. Sanitize and wash everything. Clean equipment with hot soapy water. Rinse apples thoroughly.
  2. Chop the fruit. Quarter or cut into eighths. Discard any rotten, moldy, or insect-damaged fruit.
  3. Grind to a coarse pulp. Feed apples through a grinder until pea-sized. Without a grinder, use a food processor with the coarsest blade, or pound in a bucket with a pole.
  4. Line the press basket. Place a mesh bag inside to prevent pulp from mixing into the juice.
  5. Load the pulp. Fill basket mostly full. Fold mesh edges over.
  6. Apply pressure slowly. For a screw press, place plate on pulp and turn handle clockwise until juice stops. For hydraulic or car jack, activate gradually. Swap collection container when full.
  7. Re-press (optional). Press spent pulp again for remaining juice.
  8. Finish and store. Skim froth from juice. Pour into clean bottles. Refrigerate for sweet cider or transfer to fermenter for hard cider.

Common Mistakes and Their Fixes

  • Skipping the grind: Whole apples yield almost no juice. Grinding is mandatory. Food processor or bucket-and-pole method works for small batches.
  • Dirty fruit: Unwashed apples carry dirt and wild microbes. Rinse them.
  • Torn or missing mesh: Without mesh, pulp contaminates juice, requiring extra straining.
  • Pressing too fast: On a screw press, use gradual, steady turns. Stop when juice flow slows.
  • Safety on a car jack press: Place a metal plate between jack and wooden frame to prevent indentation. Rotate handlers on screw presses to avoid strain.

Martha Stewart’s cider press guide follows the same procedure.

Turning Sweet Cider Into Hard Cider

This ensures predictable alcohol and flavor. Skip this step for fresh cider.

FAQs

Can I press apples without a scratter?

Yes, but you must still grind the fruit. A food processor with the coarsest blade or a pole to mash apples in a bucket works. The critical point is pea-sized pieces before pressing or extraction will be poor.

How many apples do I need for one gallon of cider?

Do I have to core apples before pressing?

No. The grinder breaks down the entire apple, seeds included, which can add tannin for flavor. Discard only rotten or damaged fruit.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.