The 225/70R14 code means 225 mm section width, 70 percent sidewall height, radial construction, and a 14-inch wheel diameter.
For the full breakdown, see our best 225/70R14 Tires guide.
This common size fits many light trucks, older SUVs, van conversions, and classic sedans from the 80s and 90s. Knowing what every digit means helps you buy the right tire the first time and avoid a return or a dangerous mismatch.
What Does 225/70R14 Actually Mean?
Each part of the code carries a distinct, measurable specification. The table below gives you a one-stop reference you can bookmark for future purchases.
| Component | Value | What It Means |
|---|---|---|
| Section Width | 225 | Width in millimeters from sidewall to sidewall (about 8.9 inches). Not the tread width. |
| Aspect Ratio | 70 | Sidewall height is 70% of the width. 225 × 0.70 = 157.5 mm (about 6.2 inches). |
| Construction | R | Radial construction, the industry standard for passenger tires. |
| Rim Diameter | 14 | Wheel diameter in inches. A 14-inch tire fits only a 14-inch rim. |
| Total Diameter | 26.5 inches | Overall height of the tire including the rim. |
| Circumference | 83.2 inches | Distance around the tire’s outer edge. |
| Revolutions per Mile | 762 | How many times the tire rotates per mile. Affects speedometer accuracy. |
After the main code, check for a load index and speed rating printed nearby. A 98S rating means a maximum load of 1,653 pounds per tire and a safe top speed of 112 mph. These numbers matter most when hauling cargo or towing a trailer, so never mount a tire with a lower load rating than your vehicle requires.
How to Read Your Sidewall Step by Step
Start with the three-digit number printed first. The 225 is the section width in millimeters, measured from the widest point of each sidewall. It is not the tread width, which varies by brand and tread pattern. Most drivers assume 225 refers to the contact patch, but the actual tread surface is narrower.
The slash leads to 70, the aspect ratio. Multiply the width by 0.70 to find the sidewall height: 225 × 0.70 = 157.5 mm, or about 6.2 inches. A lower aspect ratio gives a shorter, stiffer sidewall for better cornering response, while a higher ratio delivers a taller, more compliant sidewall for a smoother ride on rough roads.
The R confirms radial construction. Nearly all modern passenger tires use this design, with cord plies running radially across the tire. The final 14 is the rim diameter in inches. This number must match your wheel exactly—a 14-inch tire will not seat on a 15-inch rim, and forcing it creates a serious bead-seating hazard. Always verify your wheel size before ordering. The approved rim width range for 225/70R14 tires is 6.0 to 7.5 inches.
Now find the DOT code stamped near the bead on one sidewall. The last four digits are the date code: “2423” means the 24th week of 2023.
What Are the Most Common Mistakes?
Confusing section width with tread width. The 225 mm measurement covers the widest point of the tire casing, not the contact patch. Tread width varies by brand and design, so two tires with the same 225 width can handle and grip differently on the same vehicle.
Mixing inches and millimeters. The width is always in millimeters while the rim diameter is always in inches. When calculating total tire height, keep each measurement in its own unit and convert only at the end.
Ignoring the aspect ratio. A 70 does not mean 70 mm—it means 70 percent of the width. The same tire model in a 75 and 65 ratio looks completely different on the same wheel and changes your speedometer reading by several mph.
Mismatching rim diameter. A 14-inch tire only fits a 14-inch wheel. The approved rim width range for 225/70R14 is 6.0 to 7.5 inches.
Overlooking the date code. Rubber hardens and micro-cracks with age, and the DOT code is the only reliable way to know the tire’s true manufacture date.
FAQs
What does the 70 stand for in 225/70R14?
The 70 is the aspect ratio, a percentage that tells you the sidewall height relative to the section width. For a 225 mm tire, 70 percent gives a sidewall of 157.5 mm from the rim flange to the bottom of the tread.
Can I put a different aspect ratio on my current rims?
You can switch aspect ratios, but only if the new tire’s overall diameter stays within a safe range of the original. Changing the ratio alters total height, speedometer accuracy, and ground clearance. Check your owner’s manual for approved sizes before buying.
How do I find out how old my 225/70R14 tires are?
Look for the DOT code stamped on the sidewall near the rim edge. The last four digits are the date code: the first two digits indicate the week of manufacture, and the last two indicate the year. “2423” means the 24th week of 2023.
References & Sources
- Pirelli. “How to Read Tire Markings” Official guide to decoding sidewall codes and specifications.
