How to Size a Watch Strap? | Fit Any Wrist, No Guessing

Measure the inside space between the lugs in millimeters to find strap width, then match length to wrist circumference.

Getting watch strap sizing right comes down to two numbers: the lug width where the strap meets the case, and the strap length that wraps your wrist. The good news is that both are simple to measure at home with a ruler and a piece of string, no watch shop required. This guide walks through each measurement, the common mistakes that ruin a new strap purchase, and how to read the sizing charts manufacturers publish.

What Determines Watch Strap Size?

Watch strap size is set by lug width for attachment and by length for wrist fit. Lug width is the inside distance between the two metal lugs that hold the spring bar, measured in millimeters. Strap length is the total distance around your wrist, also measured in millimeters, that the strap needs to cover.

These are two separate numbers, and you need both to buy the right strap. A strap with perfect length won’t fit a watch with the wrong lug width, and the reverse is just as true.

How Do I Measure Lug Width And Strap Length?

Lug width is the critical first number. Measure the inside gap between the lugs with a ruler or caliper, edge to edge, in millimeters. Standard widths you’ll encounter are 18 mm, 19 mm, 20 mm, 21 mm, and 22 mm, so your measurement will likely land on one of these.

For strap length, use a flexible measuring tape around your wrist where the watch sits, keeping it snug but not tight. No tape handy? Wrap a piece of string or paper around your wrist, mark the overlap, then lay it flat against a ruler. If you’re replacing a strap that already fits well, measure the long and short pieces separately, excluding the buckle from the short side, and buy the same size.

How Do I Read A Strap Size Like 20/16 mm?

Two-piece watch straps are labeled with two numbers: width at the lugs, then width at the buckle end. A strap marked 20/16 mm means it’s 20 mm where it attaches to the watch and tapers to 16 mm at the buckle. This is a standard taper and is the main format you’ll see when shopping.

The buckle is never included in the length measurement. Multiple sizing guides exclude it explicitly, so when you measure the short side of an existing strap, stop at the buckle rather than including its metal length in your total.

What Do Manufacturer Size Charts Say?

Brands publish wrist-circumference guides that map to letter sizes, and they’re worth checking once you have your measurement. IWC’s chart covers XS, S, and XL bands in both centimeters and inches, with S (Standard Strap) fitting wrists from 15.5 to 18.5 cm, or 6.1 to 7.3 inches. Swatch’s guide gives more granular ranges, spanning XS at 5.1–5.7 in up to XL at 7.1–8.1 in.

These charts are brand-specific, so use them for that brand’s straps rather than as universal standards. They’re a helpful cross-check once you know your wrist measurement, not a substitute for taking it in the first place.

If you’re shopping for a particularly slender band, our tested roundup of 12 mm watch straps covers the options that fit narrower casings.

Measurement Method Key Detail
Lug Width Ruler or caliper across the inside edges of the lugs Always in millimeters; standard sizes run 18–22 mm
Strap Length Soft tape, string, or paper around the wrist Snug but not tight at the watch position
Existing Strap Measure long and short halves separately Exclude the buckle from the short side
Two-Piece Label Read as width/length, e.g., 20/16 mm First number is lug width, second is buckle end

FAQs

What if the lug width is an odd number like 19 mm?

Does the strap width need to match both lugs?

Can I measure my wrist with a phone app instead of a tape?

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.