How to Store a 100 Ft Pocket Hose | Drain, Coil & Shield

Store a 100 ft Pocket Hose by draining every drop of water, coiling it in loose circular loops, and keeping it in a shaded, protected area like a garage or a dedicated wall-mounted holder.

One wrong move with a 100 ft Pocket Hose and the lightweight convenience turns into a tangled, burst liability. Water left inside stretches the latex core. Tight loops create permanent kinks. Direct sun weakens the outer fabric. The good news is that proper storage takes about three minutes and costs nothing if you already have a hose holder. If you’re still choosing a hose, our roundup of the best 100 ft pocket hoses covers the models that hold up best over time. Below is the exact sequence that keeps the hose working for seasons, not just one month.

Why Storage Method Matters So Much

The Pocket Hose Silver Bullet is built from a latex inner core wrapped in a PVC outer fabric. Both materials degrade fast when handled wrong. Leaving the hose pressurized strains the core and risks a burst. Water trapped inside expands if it freezes, cracking the lining. Dragging it across concrete abrades the outer layer. The official Pocket Hose blog warns that the most common reason for a short lifespan is improper storage — specifically, storing it while still wet or under pressure.

A 100-foot length makes the stakes higher than a short hose: more water trapped, heavier coil, more surface area exposed to sun. The same care steps apply, but the consequences of skipping them are bigger.

Does The Pocket Hose Need Special Equipment?

No. The official Pocket Hose documentation says the hose can “store easily on your shelf or in a drawer” thanks to its expandable design. But dedicated storage gear extends the life noticeably. The company sells a Pocket Hose Holder — a compact, rust-proof hanger that fits over a faucet or mounts to a wall. It works with all Pocket Hose lengths and costs well under $20. A simpler alternative is the Hose Strap, which bundles more than 100 feet into a neat carry loop with handles for moving to a shed.

What you do NOT need: expandable hoses advertised as a storage solution. The advice from garden pros is to steer clear of using one expandable hose as a container for another — that method damages both.

Step-by-Step: How to Store a 100 Ft Pocket Hose

Follow these five steps in order. The goal is zero trapped water, zero tight bends, and zero UV exposure.

1. Turn Off The Water And Release Pressure

Shut the spigot completely. Then disconnect the hose from the faucet and let any remaining water run out the end as the hose relaxes. This is the critical safety step — the Pocket Hose blog says “always turn off water and release pressure before storing.” Leaving the hose pressurized creates strain on the inner core that leads to failure.

2. Drain Every Drop

Hold one end up and walk the hose to a low point. Gravity does the rest. You will see the hose shrink as the water empties out. For a 100-foot hose, tilt both ends toward a drain or gravel patch. Any water left inside will stretch the latex core, weaken it over time, and cause freezing damage if temperatures drop below 32°F.

the hose lies flat and floppy, not firm or heavy anywhere along its length.

3. Coil In Loose, Relaxed Loops

Start coiling with loops that are at least two feet in diameter. Tight loops create permanent kinks and reduce the hose’s elasticity. Do not wrap it around your elbow like a rope. The official guide says to coil in a “relaxed, circular shape” and avoid tight wrapping. If the hose fights you, lay it flat and make figure-eight loops instead of circles.

4. Lift, Don’t Drag

Once coiled, pick up the hose and carry it to its storage spot. Dragging a 100-foot Pocket Hose over concrete, asphalt, or gravel abrades the outer fabric. Over about a dozen drags, the fabric layer wears thin enough to expose the latex core. The fix is simple: lift the coil with both hands.

5. Store In Shade Or Indoors

Direct sunlight weakens both the PVC outer fabric and the latex inner core. The Pocket Hose blog says to store in a garage, shed, or covered area. A wall-mounted Pocket Hose Holder works perfectly here — it keeps the coil off the ground and lets air circulate around the hose. If you use a storage bag, make sure it is well-ventilated so moisture doesn’t build up inside and cause mildew.

Common Storage Mistakes That Shorten Hose Life

Mistake What It Does The Fix
Leaving water inside Stretches latex core, causes freezing cracks Always drain both ends until flat
Storing while pressurized Strains inner core, risks burst Depressurize at the spigot before disconnecting
Tight coiling Creates permanent kinks, reduces elasticity Use 2-foot-diameter loops or figure-eights
Dragging on rough surfaces Wears through fabric layer Lift the coil, never drag it
Sun exposure Weakens fabric and core, causes cracking Store in garage, shed, or covered area
Storing wet in a sealed bag Traps moisture, grows mildew Dry fully, use ventilated bag or open holder
Using expandable hose as storage Damages both hoses Use a dedicated holder, strap, or bin

Pocket Hose’s own blog covers these exact failure points. The pattern is clear: almost every problem traces back to water and pressure left inside.

How Weather Changes Your Storage Plan

Winter In The North

Pocket Hose’s official storage guide is explicit: if you live where temps drop below freezing, the hose must come indoors. Water expands when it freezes, and even a teaspoon left in the core can crack the latex. The safest winter spot is a basement, heated garage, or mudroom. Do not leave it in an unheated shed unless you are certain the temperature stays above 32°F.

Hot And Sunny Climates

Prolonged UV exposure is the second-fastest killer of an expandable hose. A 100-foot coil left on a south-facing patio in July will show fabric fading and stiffness within one season. Store it in a shaded corner of the yard, under a covered porch, or inside a storage box that blocks sunlight. The PVC outer fabric and latex core are both UV-sensitive, so even partial shade makes a real difference.

Best Storage Gear For A 100 Ft Pocket Hose

Storage Option How It Works Best For
Pocket Hose Holder Wall or faucet-mount hanger, rust-proof Quick daily access and draining
Hose Strap Bundles 100+ ft with carry handles Moving hose between shed and yard
Large ventilated bin Loose coil inside a plastic tub with air holes Indoor winter storage in garage or basement
Wall-mounted reel Rotates to wind hose, keeps off ground Storing indoors or under an eave
Over-the-faucet hanger Simple U-hook over the spigot Quick summer storage on a shaded wall

The Pocket Hose Holder is the most practical for daily use because it keeps the coil off the ground and lets air flow around the full length. The Hose Strap is a close second if you need to move the hose between locations frequently.

Does The Pocket Hose Silver Bullet Come With Storage Instructions?

The Home Depot listing for the Pocket Hose Silver Bullet (model 13490-6, 3/4 inch diameter, 100 feet) notes that it can “store easily on your shelf or in a drawer.” But the official Pocket Hose blog goes into much more detail than the retail listing. The five-step drain-coil-store sequence above is taken directly from their documentation. No special tools are required, and the process takes less than five minutes once you have done it once.

Checklist: One-Minute Storage Routine

Use this at the end of every watering session. It takes less time than untangling a kinked hose later.

  • Turn off spigot.
  • Disconnect hose and let water run out until the hose goes flat.
  • Walk to the lowest point to confirm no water is trapped.
  • Coil in loose loops (two-foot diameter minimum).
  • Lift and carry — do not drag — to a shaded or indoor spot.
  • Hang on a Pocket Hose Holder, set on a ventilated shelf, or bundle with a Hose Strap.

That is the entire process. A 100 ft Pocket Hose stored this way will outlive one that sits in a pile on a sunny driveway by three or four seasons.

FAQs

Can you leave a 100 ft Pocket Hose connected to the faucet all season?

Not safely. A connected hose stays under residual pressure even when the faucet is off, and temperature swings can cause water inside to expand. The connection point also lets in more moisture. Disconnect and drain after each use, or at least drain it weekly if you cannot disconnect.

What is the best temperature range for storing a Pocket Hose?

Room temperature is ideal — between 50°F and 80°F. Below 32°F, trapped water freezes and cracks the latex. Above 100°F in direct sun, the PVC fabric degrades faster. A shaded garage or basement hits the right range for most of the year.

Do all Pocket Hoses use the same storage method?

Yes. Every Pocket Hose model — the Silver Bullet, the Original, and the Ultra-Flex — uses the same latex-and-PVC construction. The drain-coil-store-shade sequence works the same way for all of them. The 100-foot version just needs more care with draining because there is more tube to empty.

Can a Pocket Hose go in a garage over winter without heat?

Only if the garage stays above 32°F. An unheated garage in a Northern winter can drop below freezing for days. The safest winter bet is a heated basement, a heated garage, or an interior closet. A shed is usually colder than a garage and should not be used for winter storage.

How do you fix a kink that formed from tight storage?

Lay the hose flat in a warm, shaded area and let it relax for an hour. Light pressure from the water flow while watering can help reshape mild kinks. If the kink has been there for weeks and the fabric is creased, that section is permanently weakened and the hose may develop a leak there first next season.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.