Control two computers with one keyboard using software input sharing for simultaneous work or a USB KVM switch for a simple alternating toggle.
There are two reliable ways to handle how to use 1 keyboard for 2 computers: software input sharing for simultaneous work across the network, or a hardware USB KVM switch for alternating control with a button press. Your choice depends on the operating systems involved and whether you need both machines active at once. Each method has distinct trade-offs in cost, latency, and convenience.
Software Input Sharing: Simultaneous Control
Software solutions stream keyboard and mouse input over the local network so the cursor moves seamlessly between screens. Both computers stay active, and the keyboard controls whichever display the cursor is on. This approach works well when you need to work on two machines at the same time without swapping hardware.
Mouse Without Borders is a free Microsoft utility that handles up to four Windows PCs. Install it on every machine (the download is roughly 1.3 MB), then on the host computer select “No” when asked about existing installations — this generates a security code and computer name. On each client, select “Yes” and enter that code and name exactly as displayed; the link is case-sensitive and a single wrong character prevents connection. Both computers must be on the same local network (Wi-Fi or Ethernet). The tool supports Windows 7 through 11 but does not run on macOS or Linux. You may need to enable file sharing on the network for some features, and a reboot during installation is occasionally required.
Synergy (from Symless) is a paid cross-platform option covering Windows, macOS, and Linux. Install it on all machines, designate one as the Server, then click “Configure Server” and drag a monitor icon onto the grid to match the physical layout — double-click it to set the screen name to exactly match the client’s name. On each client, select “Client” mode, enter the Server’s IP address (shown at the top of the Server window), and click “Apply and Start.” The free open-source fork Barrier uses the same Server-Client model and identical setup steps. If auto-detection fails, disable “Auto Config” and enter the Server IP manually — this resolves most connection issues.
Software sharing has two common failure points. Both computers must be on the same network segment — a PC on Wi-Fi and another on a separate VLAN won’t discover each other. Windows Firewall may block the input-sharing port; allow local network sharing when prompted during installation to avoid this.
Hardware USB KVM Switch: Alternating Control
A USB KVM switch is a compact box with input ports for two computers and output ports for your keyboard and mouse. Pressing a button on the switch toggles which computer receives input — no software, drivers, or network setup required. It works with any operating system because the keyboard connects electrically as if plugged directly into the active machine.
Connect a USB cable from each computer to the switch inputs (labeled 1 and 2), then plug the keyboard and mouse into the output ports on the front. Press the switch button to toggle control. Basic USB-only switches cost around $20, while models supporting USB 3.0 or video output (full KVM) run higher. The trade-off is that only one computer is active at a time — you cannot drag files between screens or control both simultaneously. Latency is effectively zero since the connection is direct hardware, making this the best choice for typing-intensive work where every millisecond matters.
Which Method Fits Your Setup?
Two questions decide the right approach: what operating systems are involved, and do you need both computers active at the same time? The table below summarizes the trade-offs.
| Method | Best For | Key Trade-Off |
|---|---|---|
| Software sharing (MWB / Synergy / Barrier) | Simultaneous work across multiple PCs; file drag-and-drop between screens | Requires network setup; slight input lag; MWB is Windows-only |
| USB KVM switch | Simple switching between machines; mixed OS setups; zero software wanted | Only one PC active at a time; near-zero latency; ~$20 for basic models |
For a Windows-only environment, Mouse Without Borders is free and straightforward. Mixed operating systems require Synergy or Barrier. If you don’t need simultaneous control and prefer a plug-and-play solution, a USB KVM switch is the cleanest route. For a keyboard that handles multi-computer setups well, our roundup of the best keyboards designed for dual-computer use covers tested models that pair well with either method.
For detailed step-by-step instructions on both approaches with setup screenshots, PCMag’s guide to controlling multiple computers with one keyboard and mouse is a thorough reference.
FAQs
Can I use Mouse Without Borders on a Mac?
No — Mouse Without Borders is a Windows-only utility from Microsoft and does not run on macOS. For a mixed Windows and Mac setup, use Synergy or its free open-source fork Barrier, both of which support cross-platform input sharing across the same local network.
Does a USB KVM switch require software or drivers?
No — a basic USB KVM switch is a pure hardware device with no software component. The computer detects the keyboard as if it were plugged directly into the port, so no drivers, configuration, or OS compatibility checks are needed — it works with Windows, macOS, Linux, and Chromebooks.
Which method has lower input latency for typing?
A hardware KVM switch has near-zero latency because the keyboard connects through a direct electrical path. Software solutions introduce slight network-dependent lag, though on a fast wired Ethernet connection the delay is barely noticeable for everyday typing and cursor work. For competitive gaming or precise real-time work, the hardware route is the safer choice.
References & Sources
- PCMag. “How to Control Multiple Computers With One Keyboard and Mouse.” Covers both software and hardware methods with detailed setup walkthroughs.
