What Is a Bubble Blanket? | Pool Heating & Savings Basics

If you own a swimming pool or hot tub, you have probably seen the familiar sheet of blue or clear plastic bubble wrap floating on top of the water. That is a bubble blanket—often called a solar cover, thermal blanket, or solar blanket—and it serves a straightforward purpose: capture free heat from the sun and keep it in the water overnight. Unlike a safety cover, which prevents accidental entry, a bubble blanket is a thermal tool built around bubble-cell construction that insulates the surface. When used correctly, it cuts chemical loss, reduces heating costs, and extends your swimming season by weeks.

How a Bubble Blanket Actually Works

Sunlight passes through the translucent polyethylene material and warms the water directly. The air bubbles trapped between the two plies of film act as insulation, slowing down heat loss through evaporation—the single biggest driver of pool heat loss. At night, that same insulation layer also warms the water returning from your heater rather than escaping into the cool air. The material’s design transmits up to 80% of the sun’s energy, so the water gets most of the solar gain while losing far less to the air above it.

The MPBAA’s consumer guide confirms these benefits as the primary reason pool owners invest in one.

Bubble Side Up or Bubble Side Down?

Nearly every installation source agrees: the bubble side faces down against the water. The flat top surface faces the sun. The recessed air cells underneath trap a thin layer of air between the blanket and the water surface, creating the insulation layer that slows heat loss. Installing it with bubbles up does not damage the blanket, but it reduces effectiveness because the air pockets sit above the water rather than against it, and debris collects in the cells instead of rinsing off the smooth top.

For spa and hot tub use, do not cut the blanket to fit the shape of the spa shell itself. Instead, drape the bubble blanket over the water surface and let the extra material sit on the raised edges. The water weight holds it in place, and you preserve the full thermal benefit without losing the edge seal that cutting would break.

Common Uses and the One Big Limitation

Bubble blankets come in standard rectangular sizes that can be trimmed with scissors or a utility knife to match most pool shapes—rectangular, oval, kidney, or freeform. They are also sold in rolls that you cut yourself. For above-ground pools, the cover simply floats on the surface; for in-ground installations, you can anchor the edges to keep wind from pulling it off. Most pool supply retailers, including the roundups at our tested bubble blanket recommendations, offer multiple thicknesses—typically 8-mil to 16-mil—where thicker blankets last longer and insulate slightly better but weigh more to handle.

The critical limitation: a bubble blanket is not a safety cover. Never treat it as one. A child or pet can push against the floating material, which offers no structural resistance. The plastic film is also a drowning hazard itself—a person beneath the cover can become trapped under it. Local safety codes in most jurisdictions require a separate rigid safety cover or fencing around any pool using a floating thermal blanket.

Feature Bubble Blanket (Solar Cover) Safety Cover
Primary job Trap heat, reduce evaporation Prevent accidental entry
Material Polyethylene film with air cells Reinforced mesh or solid vinyl
Floats on water? Yes No (anchored over top)
Safety rated? No Yes (ASTM F1346 typically)
Typical lifespan 1–4 seasons (UV exposure) 7–15 years

Synonyms You Will Encounter

You may hear the same product called a solar blanket, thermal blanket, solar pool cover, bubble cover, or floating solar cover. All these terms refer to the same bubble-cell construction. The term “bubble blanket” can also describe unrelated consumer goods—a textured fleece throw blanket for bedding or the large bubble wrap sheets lined with fabric used to protect furniture during moves. If you are shopping online, check the product description for “pool” or “spa” in the title to confirm you are looking at the right item.

FAQs

Can I leave a bubble blanket on all summer?

Yes, although UV exposure will degrade the material over time. Leaving it on continuously keeps the water warmest, reduces chemical loss, and lowers water replacement needs. Just remove it before heavy use or if the water temperature climbs above comfortable levels on hot days.

Does a bubble blanket work with a heat pump?

Yes—in fact, pairing a bubble blanket with a heat pump is the most efficient setup. The blanket holds the heat the pump generates, so the pump runs less often.

How do I clean a bubble blanket?

Rinse it with a garden hose on a flat surface, using a mild detergent if algae or dirt has built up. Avoid leaf blowers or high-pressure washers that can puncture the cells. Let it dry flat in the shade before storing, and fold loosely rather than rolling tightly to avoid cracking the plastic.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.