TPU filament is a flexible, rubber-like 3D printing material that combines plastic-like processability with excellent elasticity and abrasion resistance.
What is TPU filament? It’s a thermoplastic polyurethane (TPU) — a flexible filament that behaves like rubber but prints on standard FDM printers. Unlike rigid plastics, TPU bends, stretches, and absorbs impact, making it the go-to material for phone cases, gaskets, shoe soles, and vibration dampers. In this article you’ll learn exactly what makes TPU special, how to print it successfully, and the mistakes to avoid.
TPU Filament Properties and Uses
TPU belongs to the TPE (thermoplastic elastomer) family. It softens when heated and hardens when cooled, giving it plastic-like processability plus rubber-like elasticity. Its defining traits include high flexibility, excellent abrasion resistance, chemical/oil resistance, and shock absorption. Common uses: phone cases, shoe insoles, gaskets, seals, grips, vibration dampers, and prosthetics. The table below summarizes key characteristics for printing.
| Property | Typical Value / Description |
|---|---|
| Hardness | 95A to 98A (common grades) |
| Print speed | 5–30 mm/s |
| Fan speed | 20–30% (minimal cooling) |
| Layer height | 0.2–0.3 mm |
| Infill | 20–50% |
| Best uses | Phone cases, gaskets, grips, insoles, seals |
| Printer type | Direct‑drive preferred; Bowden possible with harder TPU |
For those ready to buy, our tested product roundup of the best rubber 3D printing filament reviews top options for your projects.
How Do You Print TPU?
Printing TPU successfully requires slower speeds and careful tuning. Use 5–30 mm/s, minimal cooling (20–30% fan), and a layer height of 0.2–0.3 mm. Infill between 20–50% balances strength and flexibility. A direct‑drive extruder makes feeding easier, but Bowden systems can work with harder TPU (e.g., 95A or 98A). Markforged’s guide recommends starting with harder TPU grades if your printer struggles with flexibles. Because TPU is flexible, rapid movement can cause jams inside the nozzle or feed path. Keep the filament dry and feed it correctly to avoid extrusion issues. The first layer should stick cleanly without stringing — that’s your success cue.
What Are Common TPU Printing Mistakes?
The most frequent errors include printing too fast, over‑cooling, and assuming all TPU is the same. Each can lead to jams, poor adhesion, or failed prints. Fast speeds cause the filament to buckle or grind; high fan speeds reduce inter‑layer bonding; treating TPU like a rigid plastic results in deformation under heat or load. NinjaTek’s learn page emphasizes keeping TPU dry and feeding it correctly. Even “easy‑print” TPU still needs tuned settings — ignore printer compatibility and you’ll get messy results. Harder TPU (95A) prints more reliably than softer variants, but all TPU demands slower, deliberate printing.
FAQs
Is TPU harder to print than PLA?
Yes, TPU is more challenging due to its flexibility. It requires slower speeds, careful tension, and minimal cooling. However, with proper settings most modern printers can handle it.
Can I use TPU in a Bowden printer?
Yes, but it’s trickier. Harder TPU (95A or 98A) works better in Bowden systems. Direct‑drive extruders give more control and are recommended for soft, highly flexible TPU.
Does TPU need a heated bed?
Not always. TPU can print on clean glass without heat, but many users find a warm bed (40–60°C) improves first‑layer adhesion. Check your specific filament’s guidelines.
References & Sources
- Markforged. “Your TPU 3D Printing Questions Answered.” Guidance on print speeds, hardness selection, and common mistakes.
