Our readers keep the lights on and my morning glass full of iced black tea. As an Amazon Associate, I earn from qualifying purchases.9 Best Bathroom Exhaust Fan With Heater And Light | 110 CFM Quiet

Stepping out of a hot shower into a frigid bathroom is a shock no one should tolerate, especially when a single ceiling fixture can handle ventilation, heating, and lighting. A three-in-one exhaust fan replaces that drafty silence with warm airflow, keeps your mirrors fog-free, and exhausts humidity before mold takes hold — it transforms the morning routine from a shiver to a comfort.

I’m Min — the co-founder and writer behind Gadgets Feed. I’ve spent dozens of hours cross-referencing CFM ratings, sone noise levels, heater wattages, and installation requirements across the leading models to find the units that actually deliver on their triple-function promise without burning through your electrical budget.

Whether you’re remodeling a master bath or upgrading a half-bath, the best bathroom exhaust fan with heater and light must balance quiet operation, effective moisture removal, and genuine warmth without overcomplicating the wiring.

How To Choose The Best Bathroom Exhaust Fan With Heater And Light

Three-in-one bathroom fans simplify your ceiling by combining ventilation, heating, and illumination into one housing, but the specifications vary widely. Rushing into a purchase based on price alone can leave you with a noisy fan that barely moves air or a heater that trips your breaker every morning. Focus on the three pillars: airflow capacity, noise level, and heating power.

CFM — The Real Air-Moving Muscle

CFM stands for cubic feet per minute, and it measures how much air the fan can exhaust. For a bathroom, the industry rule is simple: you need at least 1 CFM per square foot of floor area. A 100-square-foot bathroom requires a minimum of 100 CFM. If your fan is undersized, steam lingers, mirrors stay fogged, and moisture seeps into paint and grout. Oversized fans can be louder and may pull conditioned air out of the room too fast. Stick to the 1:1 ratio and bump up 10–20% for bathrooms with high ceilings or large soaking tubs.

Sones — How Quiet Is Quiet Enough?

Sones measure perceived loudness. A rating of 1.0 sone is roughly the sound of a quiet refrigerator hum — very unobtrusive. At 2.0 sones, you’re hearing a normal conversation in the next room. At 4.0 sones, the fan is clearly audible and may drown out a phone call. For a bathroom fan with heater and light, aim for 1.5 sones or lower if you want to relax in the bath. Some louder fans exceed 3.0 sones, which is acceptable for a powder room but annoying for daily use.

Heater Wattage — Warmth Without Wiring Woes

Most built-in heaters in these combo units range from 1300W to 1600W. A 1500W heater is standard and can warm a small to medium bathroom in a few minutes. The critical catch: these heaters draw heavy current. A 1500W heater pulls about 12.5 amps, and adding the fan and light can push a 15-amp circuit to its limit. Many units require a dedicated 20-amp circuit for safe operation, especially the 1600W PTC heaters. Check your breaker panel and consult an electrician before installation — a tripped breaker on a cold morning is a miserable start to the day.

Quick Comparison

On smaller screens, swipe sideways to see the full table.

Model Category Best For Key Spec Amazon
Panasonic WhisperWarm FV-0511VHL1 Premium Quiet integrated heater & light 110 CFM / 1.0 Sone / 1600W Heater Amazon
Panasonic WhisperFit FV-0511VFL1 Premium Dimmable LED & low noise 110 CFM / 1.0 Sone / No Heater Amazon
OREiN 3-in-1 OL17003 Mid-Range Humidity sensor auto-on 160 CFM / 1.0 Sone / No Heater Amazon
Broan-NuTone 100HL Mid-Range Powerful 1500W heater combo 100 CFM / 3.5 Sones / 1500W Heater Amazon
Delta Breez Radiance Mid-Range Energy-efficient DC motor 80 CFM / 1.5 Sones / 1300W Heater Amazon
VEVOR 110 CFM Value Remote control & adjustable temps 110 CFM / 1.5 Sones / 1500W Heater Amazon
Broan-NuTone Room Side 110 CFM Mid-Range 4-selectable CCT light settings 110 CFM / 1.0 Sone / No Heater Amazon
Broan-NuTone 750 Round Budget Entry-level fan & light combo 100 CFM / 3.5 Sones / No Heater Amazon
Air King DRLC701 Budget Oil-rubbed bronze style 70 CFM / 4.0 Sones / No Heater Amazon

In‑Depth Reviews

Best Overall

1. Panasonic WhisperWarm FV-0511VHL1

1600W PTC HeaterPick-A-Flow 50/80/110 CFM

The Panasonic WhisperWarm is the gold standard for a reason: its 1600W PTC ceramic heater delivers instant, even warmth that cuts through bathroom chill in under two minutes. The DC/ECM motor runs whisper-quiet at 1.0 sone, and the Pick-A-Flow selector lets you switch between 50, 80, and 110 CFM depending on your room size and duct length. The 3000K LED light panel is bright with adjustable dimming, and the integrated <1W night light is a thoughtful touch for middle-of-the-night trips.

Installation is relatively straightforward thanks to the Flex-Z Fast bracket, which allows a single person to position and secure the housing without attic access. The unit requires a dedicated 20-amp circuit — a non-negotiable detail that many buyers miss. The included 4-inch or 6-inch duct adapter gives flexibility for different existing ductwork, and the overall build quality feels substantial compared to budget alternatives. The ultra-slim housing fits 2×8 joist construction.

At this premium tier, the WhisperWarm earns its place as the most complete three-in-one package on the market. The heater is powerful enough to warm a medium bathroom quickly, the fan moves air efficiently without sounding like a jet engine, and the LED lighting is genuinely pleasant. The only real drawback is the price, but for a unit that combines all three functions this well, it justifies the investment for anyone who values comfort and quiet.

Why it’s great

  • Incredibly quiet 1.0 sone operation with dimmable LED and night light
  • 1600W PTC heater warms a medium bathroom in under two minutes
  • Flexible Pick-A-Flow allows 50/80/110 CFM to match room needs

Good to know

  • Requires dedicated 20-amp circuit; plan wiring accordingly
  • Higher cost than mid-range competitors
Premium Pick

2. Panasonic WhisperFit FV-0511VFL1

Dimmable 10W LEDPick-A-Flow 50/80/110 CFM

The WhisperFit is Panasonic’s answer for buyers who want exceptional ventilation and lighting quality but don’t need a built-in heater. It shares the same ultra-quiet DC/ECM motor platform as the WhisperWarm, operating at just 1.0 sone at 110 CFM. The dimmable 10W LED panel is adjustable from warm to cool white, and the <1W night light provides safe low-level illumination. Pick-A-Flow lets you set the fan to 50, 80, or 110 CFM via a simple switch on the housing.

The retrofit installation is a standout feature: the Flex-Z Fast bracket uses a single hinge that lets you position the fan from inside the room, eliminating the need for attic access. It supports both 4-inch and 6-inch duct connections, which is rare in this class. The ultra-slim housing fits into tight 2×6 ceiling joist spaces. The fan is ENERGY STAR certified and draws very little power, which makes it ideal for daily long-cycle operation.

If your bathroom already has a separate heater or you live in a mild climate where heating isn’t a priority, the WhisperFit delivers the best ventilation and lighting in its class. The noise level is genuinely whisper-quiet — you can run it during a phone call without raising your voice. The dimmable LED with night light is a premium touch that most competitors don’t offer. Pair it with a wall-mount heater if you need warmth, and you still come out ahead on features.

Why it’s great

  • Exceptionally quiet 1.0 sone operation with dimmable LED and night light
  • Flex-Z Fast bracket enables easy retrofit without attic access
  • 4-inch and 6-inch duct compatibility for flexible installation

Good to know

  • No built-in heater — must buy separately if you need warmth
  • Premium price for a fan without heating function
Best Value

3. OREiN 3-in-1 OL17003

160 CFMHumidity Sensor Auto-On

The OREiN 3-in-1 punches well above its mid-range price by delivering 160 CFM of airflow at just 1.0 sone — that’s more air movement than many premium models, and it’s virtually silent. The built-in humidity sensor is the headline feature: set it to 60% relative humidity, and the fan automatically kicks on when steam builds up, turning off once levels drop. This completely removes the guesswork from bathroom ventilation and prevents mold growth without you lifting a finger.

The LED light is adjustable across three color temperatures (3000K, 4000K, 5000K) with a max output of 1500 lumens — enough to light a medium bathroom thoroughly. The 2200K night light is a nice addition for nighttime use. Installation is room-side, meaning you don’t need attic access, and the ceiling opening fits 11.81 x 11.02 inches. It requires a 6-inch duct, which handles high CFM better than 4-inch ducts; an adapter is available if your home uses 4-inch ductwork.

Keep in mind that this model does not include a heater. It’s a three-in-one in the sense of fan, light, and humidity sensor — not fan, heater, and light. If humidity control and quiet, high-volume airflow are your priorities, the OREiN offers incredible value. The ENERGY STAR and ETL certifications back its build quality, and the 5-year warranty provides peace of mind. For bathrooms that don’t need supplemental heating, this is the smartest buy.

Why it’s great

  • 160 CFM at 1.0 sone — exceptional airflow with near-silent operation
  • Humidity sensor auto-starts fan at 60% RH, no manual switching
  • 1500 lumens adjustable LED with night light mode

Good to know

  • No built-in heater — fan/light/humidity sensor only
  • Requires 6-inch duct; 4-inch adapter may increase noise
Top Performer

4. Broan-NuTone 100HL

1500W Heater100 CFM for 4″ Duct

The Broan-NuTone 100HL is a no-nonsense combo unit that delivers a genuine 1500-watt heater, a 100 CFM fan, and a 100-watt max incandescent light fixture in one housing. It’s HVI-certified and fits into 4-inch ductwork, making it a drop-in replacement for older Broan units in many homes. The 1500W heater warms a bathroom up to 90 square feet effectively, and the fan is rated at 3.5 sones — louder than premium models but acceptable for a utility-focused unit.

Installation is DIY-friendly with a 24-inch adjustable hanger bar system that fits various joist spacings. The white polymeric grille blends into most ceilings. Importantly, this unit requires a 20-amp circuit — the heater draws significant current, and using a standard 15-amp circuit can lead to tripped breakers or even heater failure over time. Several user reports confirm that proper wiring with a dedicated 20-amp circuit extends the heater’s lifespan significantly.

If you need a functional three-in-one fan, heater, and light without paying for premium noise reduction or fancy LED panels, the Broan 100HL gets the job done reliably. The heater is genuinely warm and directional, the fan moves enough air for small to medium bathrooms, and the incandescent light fixture gives you flexibility to choose your own bulb. It’s not the quietest or most stylish option, but for raw heating power at a mid-range price, it’s hard to beat.

Why it’s great

  • 1500W heater provides fast, effective warmth for small to medium bathrooms
  • Compatible with 4-inch ductwork for easy retrofit replacement
  • Reliable Broan build quality with straightforward installation

Good to know

  • 3.5 sones fan is noticeably louder than premium competitors
  • Requires 20-amp dedicated circuit for safe heater operation
Best Battery Life

5. Delta Breez Radiance

1300W HeaterDC Motor 70,000 Hours

The Delta Breez Radiance is a thoughtful mid-range option that prioritizes energy efficiency and longevity. Its brushless DC motor is rated for 70,000 hours of operation — that’s eight years of continuous runtime or two decades of typical use. At 80 CFM and 1.5 sones, it’s quiet enough for a master bathroom, though the airflow is best suited for rooms up to 80 square feet. The integrated 1300W heater includes a thermal cutoff fuse and thermostat for safe operation.

The modern white housing and integrated LED light provide clean, even illumination. The heater works well but the grill’s fin design directs warm air at a 45-degree angle rather than straight down — you won’t feel a direct blast of heat directly under the unit. This is a minor ergonomic detail but worth noting if you plan to stand directly beneath it. The installation is standard for a 4-inch duct fan, and the included mounting hardware is adequate.

The real selling point here is the DC motor’s electricity consumption: it moves 7 CFM per watt, which is significantly more efficient than AC-motor competitors. If you run your bathroom fan for long periods (which you should for proper ventilation), the energy savings add up. The 1300W heater is slightly less powerful than 1500W units, but for small to medium bathrooms, it still provides comfortable warmth. The Delta Breez is a quiet, efficient, and reliable choice for the eco-conscious homeowner.

Why it’s great

  • 70,000-hour DC motor provides exceptional longevity and energy efficiency
  • Quiet 1.5 sone operation with safe thermal cutoff on heater
  • Low power consumption; ENERGY STAR certified performance

Good to know

  • 80 CFM is best for rooms up to 80 sq. ft. — not suitable for larger spaces
  • Heater airflow angled at 45 degrees due to grill fin design
Best Value

6. VEVOR 110 CFM Remote Control

1500W HeaterRemote Control

The VEVOR 110 CFM model packs an impressive feature set into a value-tier package: a 1500W heater, 110 CFM fan, adjustable LED light (3000K–5000K), and a wireless remote control. The noise level is rated at 1.5 sones (approximately 33 dB), which is genuinely quiet for this price bracket. The remote lets you control fan speed, heater on/off, and light brightness without leaving the shower or bed. The heater function is strong and effective for medium bathrooms.

Installation is described as a cut-free, ceiling-mounted design that doesn’t require attic access, but several users note it’s more complex than advertised and may still benefit from professional help. The unit requires the remote to turn on the fan — the wall switch only controls the light, which is a design quirk that catches many buyers off guard. If you lose the remote, the fan is unusable, so keep it in a safe spot. The heater and exhaust cannot run simultaneously, which is standard for most combo units at this level.

For the price, the VEVOR delivers solid heating, quiet ventilation, and convenient remote operation. The adjustable color temperature LED is a welcome feature, and the 1500W heater provides warmth comparable to units costing twice as much. The main compromises are installation difficulty and the reliance on the remote for basic fan operation. If you’re comfortable with wiring and don’t mind the remote dependency, this is a compelling budget-friendly three-in-one.

Why it’s great

  • 1500W heater and 110 CFM fan with 1.5 sone noise level
  • Wireless remote controls fan speed, heater, and adjustable LED light
  • Adjustable 3000K–5000K light temperature for personalized ambiance

Good to know

  • Remote required for fan operation — wall switch only controls light
  • Installation may be more complex than advertised; attic access often needed
Best Display

7. Broan-NuTone Room Side 110 CFM

110 CFM 1.0 Sone4 Selectable CCT

The Broan-NuTone Room Side series is designed specifically for retrofits where attic access is impossible. This 110 CFM model operates at a quiet 1.0 sone — nearly silent during normal use. The CleanCover grille features a full perimeter air intake that reduces dust buildup and stays cleaner longer. The standout feature is the 4-selectable CCT (correlated color temperature) LED light: toggle through 3000K (warm white), 3500K (bright white), 4000K (cool white), and 5000K (daylight) with a simple flip of the wall switch.

Installation is genuinely room-side, meaning you can replace an existing fan without cutting into the ceiling from above. The housing measures 9-1/4 x 10 x 5-3/4 inches and fits 2×6 joist construction. The grille is 12-1/4 x 12-1/4 inches, which covers most existing ceiling holes. The fan is ENERGY STAR certified and draws minimal power. The lighting memory function automatically saves your last color temperature setting, so you don’t have to cycle through every time.

This unit does not include a heater, so it won’t solve the cold bathroom problem. But if you already have a radiant heater or live in a temperate climate, the Broan Room Side offers exceptional ventilation performance with the most flexible lighting system in its class. The 1.0 sone noise level puts it in the same quiet category as premium Panasonic models but at a lower price point. For a no-attic-access installation with customizable lighting, this is the best solution.

Why it’s great

  • True room-side retrofit — no attic access needed for installation
  • 4 selectable CCT light settings (3000K–5000K) with memory function
  • Very quiet 1.0 sone operation with excellent 110 CFM airflow

Good to know

  • No built-in heater — ventilation and light only
  • Wire spring clips for grille can be difficult to align properly
Budget Champion

8. Broan-NuTone 750 Round

100 CFM3.5 Sones

The Broan-NuTone 750 Round is a classic, no-frills fan and light combo that has been a staple in homes for years. It delivers 100 CFM of airflow through a 4-inch duct, making it suitable for bathrooms up to 90–100 square feet. The noise level is rated at 3.5 sones — louder than modern premium fans but acceptable for a powder room or guest bath where occupants don’t linger. The round white plastic grille with glass lens has a clean, traditional look that blends into most ceilings.

The fan unit can be wired for simultaneous or separate operation with the light, giving you flexibility with switch setups. It supports up to a 100-watt incandescent lamp (not included) or an equivalent CFL/LED bulb. The permanently lubricated motor is housed in rugged steel for durability. It’s UL listed for use over a bathtub or shower when installed with a GFCI-protected circuit, and it’s Type IC rated for direct contact with thermal insulation.

This is the budget-friendly option for homeowners who need reliable ventilation and basic lighting in a secondary bathroom. It won’t provide the whisper-quiet operation or the heating function of higher-tier units, but it does the core job — removing steam and odors — at a fraction of the cost. The round grille design is a plus for replacing older round fixtures without drywall patching. If you’re on a tight budget and don’t need a heater, the Broan 750 Round is a dependable workhorse.

Why it’s great

  • Reliable 100 CFM ventilation for small to medium bathrooms
  • Simple round design fits standard ceiling cutouts for easy replacement
  • UL and IC rated for safe installation over bathtubs and insulated ceilings

Good to know

  • No built-in heater — fan and incandescent light combo only
  • 3.5 sones noise level is noticeably louder than premium models
Compact Pick

9. Air King DRLC701 Round

70 CFMOil-Rubbed Bronze

The Air King DRLC701 stands out for its design: an oil-rubbed bronze finish with a ribbed frosted glass lens that adds a touch of style to bathrooms that typically get utilitarian white plastic fixtures. It operates at 70 CFM with a 4-sone noise rating, making it best suited for small powder rooms or half-baths up to 70 square feet. The fan and light can be wired to function separately, giving you control over each function. It uses two 26-watt medium base fluorescent lamps (not included) or can accommodate 60-watt A19 incandescent bulbs.

Installation is straightforward with adjustable hanging brackets, and the 4-inch round duct collar with damper helps prevent back drafts. The motor is permanently lubricated for maintenance-free operation. The 70 CFM airflow is adequate for small spaces but will struggle in larger bathrooms with high ceilings. The 4-sone rating translates to approximately 48 decibels, which is clearly audible — not ideal for relaxing baths but acceptable for a utility space.

The Air King DRLC701 is a niche pick for homeowners who prioritize aesthetics over performance specifications. If your bathroom is small (under 70 square feet) and you want a fan fixture that looks more like a light fixture than an industrial vent, this bronze model adds visual warmth. It does not include a heater, so it won’t address cold mornings. For its intended use — replacing an old round fan in a powder room with style — it’s a solid, affordable choice.

Why it’s great

  • Stylish oil-rubbed bronze finish with ribbed frosted glass lens
  • Fan and light can be wired to separate switches for independent control
  • Easy replacement installation with adjustable hanging brackets

Good to know

  • 70 CFM is only suitable for small bathrooms under 70 sq. ft.
  • 4.0 sones loud; no built-in heater function

FAQ

Can I use a standard 15-amp circuit for a bathroom fan with a heater?
Most 1500W bathroom fan heaters draw about 12.5 amps. Adding the fan motor and light can push the total load past 13 amps on a 15-amp circuit, leaving very little margin. The National Electrical Code typically requires a dedicated 20-amp circuit for bathroom heater/fan combos. Check the manufacturer’s specifications — many explicitly state “20-amp circuit required.” Using a 15-amp circuit risks tripping the breaker and can shorten the heater’s lifespan.
Why does my bathroom fan sound louder than the sone rating suggests?
Sone ratings are measured in a laboratory with optimal duct installation. In real-world conditions, noise increases with duct restrictions such as sharp bends, undersized ducts, or long duct runs. A fan rated at 1.0 sone can sound significantly louder if connected to a 50-foot length of 4-inch flex duct with two 90-degree turns. Short, straight, and smooth duct runs with the proper diameter (6-inch for high CFM fans) are essential to maintain the rated noise level.
Do three-in-one fan/heater/light units need a special wall switch?
Yes, most three-in-one units require a multi-function wall switch or a remote control to operate each function independently. Some units come with a dedicated wall controller, while others require you to purchase a separate multi-gang box and switches. Units with remote controls bypass the need for complex wiring, but the remote must be stored in the bathroom. Always check what switching method the unit supports before installation — wiring for separate fan, heater, and light control is more involved than a simple on/off switch.

Final Thoughts: The Verdict

For most users, the best bathroom exhaust fan with heater and light winner is the Panasonic WhisperWarm FV-0511VHL1 because it combines a whisper-quiet 1.0 sone fan, a powerful 1600W PTC heater that warms a bathroom in under two minutes, and a dimmable LED with night light — all in a well-engineered package. If you want pure ventilation with customizable lighting and don’t need a heater, grab the Panasonic WhisperFit FV-0511VFL1. And for value-driven humidity control with silent airflow, nothing beats the OREiN 3-in-1 with humidity sensor.