Types of Abrasive Paper | Choose The Right Grit Every Time

Abrasive paper is a coated abrasive—grains bonded to a backing—used to smooth, shape, or polish surfaces, and choosing the right type depends on matching the abrasive mineral and grit to your material and task.

Abrasive paper isn’t just sandpaper. It’s a system: different minerals cut different materials, different grits remove or finish, and the backing format—paper, cloth, or sponge—determines how you apply it. Use the wrong combo, and you’ll scratch what you’re trying to smooth or clog the paper before it does any real work. Here’s how to match the paper to the job, every time.

Abrasive Paper Types By Mineral

The abrasive grain bonded to the backing is the biggest factor in performance. Each mineral has a personality—some cut aggressively, some leave a fine finish, and some wear out fast by design.

Aluminum oxide is the most versatile general-purpose abrasive. It works on wood, metal, plastic, drywall, and painted surfaces, and it’s the standard choice for both hand sanding and power sanding. Silicon carbide cuts harder materials—glass, ceramics, stone, and automotive paint—and is the go-to for wet sanding because it’s waterproof. Emery (often sold as emery cloth) is reserved for metal sanding and polishing; it’s a dense, tough grain that cleans rust and prepares metal for finishing. Garnet is a natural mineral used mostly for hand sanding wood—it wears faster than synthetics but leaves a very fine finish. Zirconia alumina and ceramic alumina are premium abrasives designed for power sanding heavy stock removal on wood, metal, and fiberglass; they run hotter and last longer but are overkill for light hand work.

Grit Sizes: What The Numbers Mean

Lower grit numbers = coarser paper that removes material fast. Higher numbers = finer grit that leaves a smooth finish. Coarse grits (40–80) strip paint, shape wood, and level surfaces. Medium grits (100–150) smooth out tool marks and prepare for finishing. Fine grits (180–320) remove scratches from previous passes and prepare for stain or paint. Very fine grits (400–1200+) polish and sand between coats. The golden rule: never skip more than one grit step, or you’ll spend forever trying to remove the scratches from the coarser paper. In North America, grits are usually marked with CAMI numbers (e.g., 100, 220) or FEPA P-grits (P120, P400); the systems overlap closely.

Paper Format and Backing: Dry vs. Wet vs. Sponge

The backing determines how the paper works with the tool and the surface. Dry abrasive paper is the standard sheet for wood, drywall, paint, and putty—it works best on a pad or block and clogs less quickly with open-coat construction (grains spaced apart to let dust escape). Waterproof (wet/dry) paper is used with water or oil as lubricant for metal, stone, glass, and automotive work; the liquid flushes away debris and prevents clogging. Sponge abrasive paper has a foam backing that conforms to curved and contoured surfaces, making it the right pick for sanding moldings, rounded edges, and irregular shapes in wood or metal work.

If you are shopping for sheets or discs specifically for woodworking, our tested roundup of top abrasive papers for wood covers the best picks by grit and mineral to match your project.

Common Mistakes and How To Avoid Them

The most frequent error is using the wrong mineral for the material—silicon carbide on soft wood clogs instantly, and garnet on metal does nothing. Another is skipping grit progression: jumping from 80-grit to 220-grit leaves scratches that 220 can’t remove, so you either back up or accept a rough finish. Pulling out a dry sheet for a wet-sanding job also ruins the paper mid-stroke. Finally, check whether the paper is intended for hand sanding or power sanding—power-sanding sheets stick to the sander differently and have different hole patterns (dust extraction); using a hand-sanding sheet on a sander may tear or fail to hold. Test on scrap first, and reserve very fine grits (600+) for polishing, not material removal.

References & Sources

  • Wikipedia. “Sandpaper” Covers standard abrasive mineral types, grit systems (FEPA, CAMI), and backing materials.
  • Lowe’s. “Sandpaper Buying Guide” Details grit progression, mineral selection, and paper formats for home users.
  • The Home Depot. “Sandpaper Buying Guide” Explains open vs. closed coat, backing types, and how to choose by material.

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.