How to Get Asset Tag? | Find It On Any Windows PC

The asset tag on a Windows PC usually sits on a physical label, in the BIOS, or behind one WMI command that prints it in seconds.

An asset tag is the first thing IT checks when a machine breaks or goes missing, and on most Windows PCs it hides in one of three places: a physical label, the BIOS, or a value the command line can print. The fastest retrieval method depends on the brand, and knowing how to get an asset tag off a Surface or Dell system means using that brand’s own tool.

Where Is The Asset Tag On A PC?

On most office machines, the asset tag is a small rectangular label stuck to the case, with a barcode and a short code like DE001234, AA0123, or DM005678. The sticker is often the fastest answer because many PCs never get a tag written into the BIOS — the label IS the tag. Oxford IT Help lists those code formats and points to the physical label as the first place to look.

If the sticker is gone or unreadable, Windows usually keeps the value in the device name. Search for View your PC name in Start, and the Device Name field sometimes shows the tag embedded in a form like 246D-DE001234, where the part after the hyphen is typically the asset tag. When your team is printing fresh labels instead, our roundup of barcode asset tag labels worth buying covers the durable options.

Pull The Tag From Windows With One Command

The command-line method works on any Windows PC and usually returns the tag in seconds. Open Command Prompt or PowerShell and run:

wmic systemenclosure get smbiosassettag

The line labeled SMBIOSAssetTag is the asset tag. If the result is blank, the machine may not have one programmed, which is why the physical label matters. Don’t confuse the tag with the serial number: wmic bios get serialnumber returns the serial or service tag, a different identifier that Oxford IT Help says should not be treated as an asset tag.

Set Or Change The Tag On Surface And Dell PCs

On Surface devices and Dell PCs, the asset tag can be written into the firmware itself, so it survives a wipe and shows up in management tools. Microsoft’s Surface Asset Tag, a command-line utility in the Surface IT Toolkit, handles the job on Surface and lets admins view, assign, and modify the assigned value. Microsoft’s Surface Asset Tag documentation covers the full setup; the short version is to install the Surface IT Toolkit, open Tool Library > Surface Asset Tag > Save a copy, choose ARM64 or X64, then run AssetTag.exe from an Administrator command console.

The commands that matter:

  • AssetTag.exe -g — get the proposed asset tag
  • AssetTag.exe -s testassettag12 — set a proposed tag value
  • AssetTag.exe -s — clear the proposed tag

Microsoft requires one restart after setting a tag, then a second reboot before the value shows up in WMI. To see the current tag, enter UEFI through Control Panel > Recovery > Advanced Startup > Restart now and check Device Information, or query it in PowerShell with (Get-WmiObject -query "Select * from Win32_SystemEnclosure").

On Dell PCs, the same job runs through Dell Command | Configure. Dell’s docs have you open the Command Configure directory, confirm cctk.exe is present, then run cctk --asset=Computer1 to write a customer-programmable asset tag that shows up in the BIOS asset field. It works on Windows and certain Linux installations.

Method What It Returns Best For
Physical label Tag code like DE001234 Any PC; the fastest check
View your PC name Device name with the tag embedded, like 246D-DE001234 Windows PCs with a worn sticker
wmic systemenclosure get smbiosassettag The current asset tag Any Windows PC
wmic bios get serialnumber Serial or service tag, not the asset tag Identifying factory hardware
UEFI Device Information The existing asset tag Surface devices
AssetTag.exe View, assign, or modify the tag Surface devices managed by IT
cctk --asset=Computer1 Writes the customer asset tag Dell PCs on Windows or Linux

FAQs

Is The Asset Tag The Same As The Serial Number?

No. The serial number or service tag is assigned by the manufacturer to identify the hardware, while the asset tag is added by the owner or IT department for tracking. On Windows, wmic bios get serialnumber pulls the serial, and wmic systemenclosure get smbiosassettag pulls the asset tag.

Why Does The Command Return A Blank Value?

A blank result usually means no asset tag has been programmed into the system firmware. Many devices only carry a printed label, so check the case before assuming anything else. If the PC came from an organization, the tag may live only in that company’s asset database — ask IT before writing a new one.

Do I Need Administrator Rights To Set An Asset Tag?

Yes. Microsoft’s Surface Asset Tag utility must run from a command console opened as Administrator, and the Surface IT Toolkit setup itself needs elevation. Dell’s cctk tool likewise expects an elevated prompt when writing the BIOS tag. Without admin rights, the write commands fail or stay blocked by firmware.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.