How to Set Up Audio on a Computer | From Jacks to Defaults

Setting up audio on a computer means connecting your speakers, headphones, or interface, then selecting it as the default output device in your operating system’s sound settings.

Getting sound to come out of the right speakers—and getting your microphone heard—often trips people up at the final step, not the wiring. The physical connection is usually straightforward. The part most people miss is telling the operating system which device to actually use. Here’s the whole process for Windows and Mac, from plugging in the hardware to picking the right defaults, plus what to do when audio still fails.

Connect Your Speakers or Headphones First

Before touching any settings, get the hardware physically connected. On a typical desktop PC, the speaker connector goes into the computer’s green audio-out port, and a microphone plugs into the pink input port if one exists on your model. Laptops often use a single combo jack that handles both. If your speakers draw power from the wall, switch them on before you configure anything—a powered-off speaker is invisible to the operating system.

For better sound than a PC’s built-in jack, an external DAC bypasses the computer’s internal digital-to-analog converter. A simple 3.5 mm-to-RCA cable connects a headphone jack to a receiver’s aux input, while a USB DAC connects by USB and outputs analog audio, often through RCA stereo jacks.

Pick the Right Output Device in Windows or Mac Settings

Once the hardware is connected and powered, the operating system needs to know which device to route audio to. On both Windows and Mac, this is a two-minute settings change.

On Windows 11, open Start > Settings > System > Sound, then choose your speaker under Output and your microphone under Input. On Ubuntu, the path is Settings > Sound with the same output and input choices.

On a Mac, open System Settings > Sound and select the desired output device under Output & Input. Apple’s Mac Help confirms this is the official route for choosing which speakers or headphones your Mac uses.

Set Up an Audio Interface as the Default Device

Audio interfaces—the boxes musicians plug studio monitors, microphones, and instruments into—work on the same principle, with one extra step. After connecting the interface to your speakers, monitors, or headphones, you must also make it the default audio device in the OS sound settings, exactly as you would with regular speakers.

On Windows, select the interface in Settings > System > Sound. On Mac, choose it in System Settings > Sound under Output & Input. Some interfaces require the software or drivers included in the box, so check the manufacturer’s instructions if the device doesn’t appear. Apple also notes that in Audio MIDI Setup, you can select a device in the sidebar and choose Use This Device for Sound Input or Use This Device for Sound Output—this matters when an interface needs explicit routing. If the interface doesn’t show up in Mac sound preferences, model-specific drivers may be needed.

For a deeper look at which speakers pair well with a desktop setup, our roundup of the best audio systems for PC covers tested options across budgets.

Troubleshoot When Sound Still Doesn’t Work

If you’ve chosen the right device and audio still fails, Microsoft’s support guidance for fixing sound problems recommends using Windows’ built-in sound troubleshooting and device checks. Start with the basics: confirm the device is plugged in and switched on, right-click the speaker icon in the taskbar, open sound settings, and re-select the output device. If issues persist, open Device Manager and update the audio driver.

The most common mistakes are all avoidable:

  • Selecting the wrong output or input device, which routes audio to the wrong hardware.
  • Forgetting to power on speakers or an interface before configuring it.
  • Using the wrong port color—speaker output is green, microphone input is pink.
  • Skipping included software or drivers for an audio interface.
  • Not checking driver status in Device Manager when audio fails after the right device is chosen.

On Mac, if a device must be explicitly configured, Audio MIDI Setup handles input/output routing that sound settings alone may not cover. Apple also notes that iOS and iPadOS audio devices may require clicking Enable and trusting or unlocking the device before a Mac will use them.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.