Build a portable pitching screen by building a tensioned frame of aluminum conduit or PVC pipe and covering it with lycra sleeves sewn around the edges of your screen material.
For the full breakdown, see our best Baseball Pitching Screen guide.
Whether you’re a coach protecting batters during batting practice or a parent setting up backyard drills, a portable pitching screen is one of the most useful training tools you can own. You don’t need welding skills or a workshop full of tools. A hacksaw, a drill, a sewing machine, and a trip to the hardware store cover just about everything. The best part is that a DIY screen lets you choose the exact size, fabric, and portability features that fit your space.
How to Build a Tensioned Pitching Screen Frame
The sturdiest DIY design uses aluminum conduit and stretchy lycra to hold the screen drum-tight. Aluminum conduit stays light enough to carry one-handed yet rigid enough to stand up to line drives.
Lay your screen material flat and cut two strips of stretchy lycra, each 12 inches wide by 7 feet long. Pin the lycra along the top and bottom edges of the screen with roughly 2 inches of overlap on both the front and back, then sew a sleeve using a very wide zig-zag stitch. The stretchy fabric tightens as it wraps the frame, and the wide stitch keeps the screen material from tearing around the holes.
Don’t over-sew. Too many stitch holes weaken vinyl and screen mesh, and the fabric can rip right along the seam line. Use the thickest thread your machine handles — heavier thread distributes stress better across the material.
Now cut the aluminum conduit about 6 inches wider than the actual material, or 3 inches per side. Slip the poles through the sleeves and test-fit the frame. Expect this part to be fiddly: fitting the conduit so the lycra holds the screen tight takes repeated trimming. Cut in small increments, re-test each time, and stop the moment the screen goes taut. Overshoot by even half an inch and the lycra loses all its tension.
Building a Portable Screen With PVC and Bungees
If sewing sleeves sounds like too much work, a simpler PVC frame with bungee cords works well. Assemble a rectangular frame using PVC pipes and corner connectors — either T-joints or elbows — then attach the screen material with ball bungees threaded through grommets or wrapped around the pipe. Measure the frame’s diagonals to confirm it’s square before anchoring the fabric.
PVC is cheaper than aluminum but noticeably heavier and less rigid, so brace the corners with 45-degree elbows or cross-bracing on the back. Secure the finished screen with guy lines, stakes, or base weights. Wind will tip an unanchored screen, and a tumbling frame is dangerous.
Materials Comparison
| Frame Material | Best Choice For | Fastening Method |
|---|---|---|
| Aluminum conduit | Light, rigid, professional-tension screens | Sewn lycra sleeves |
| PVC pipe + connectors | Budget builds, quick assembly | Ball bungees or rope |
| Wood 2×4 frames | Permanent or semi-permanent use | Staples every 3-4 inches |
Whichever frame you choose, match the fabric to the job: lycra and screen cloth for tensioned athletic screens, tarp or blackout cloth for outdoor blocking, and impact screen fabric for golf simulator use. These materials aren’t interchangeable without changing durability and rebound behavior.
Common Mistakes and the Fixes
Most failed DIY screens trace back to three errors. Cutting conduit too long or too short kills tension, so always trim in small increments. Skipping outdoor anchoring lets wind topple the screen, so stake or weigh the base. And sewing too many holes rips the fabric over time, so use wide zig-zag stitches and thick thread.
Check the frame is perfectly square before you tension the fabric, especially with friction-fit PVC. A slightly misshapen frame sags unevenly no matter how tight you pull the material. Build on a flat surface, measure both diagonals, and adjust the connectors before final assembly.
References & Sources
FAQs
What size portable pitching screen should I build?
Match the height to the tallest hitter in your group, and add a foot of width beyond the strike zone you’re protecting.
What material is best for a pitching screen?
Can I build a pitching screen without sewing?
Yes. Replace sewn lycra sleeves with ball bungees threaded through grommets, or wrap the screen material around the frame and secure it with zip ties. The trade-off is less even tension across the surface, which can create sagging pockets that deflect balls unpredictably.
